2000-2007 OBS Chevy Dashboard-88 94 chevy dash removal

Description

In this blog post, we will be discussing the removal of a Chevy dashboard. We will be going over the specific model years of 2000-2007, as well as the model of the Chevy dash that we will be removing. We will also touch on some tips and tricks to make the process go more smoothly. If you have ever had to remove a dashboard, you know it can be a bit of a pain. But with the right knowledge and preparation, it doesn’t have to be. So read on for everything you need to know about removing a Chevy dashboard from 88 94 chevy dash removal

OBS Chevy Dashboard

Assuming you have a basic understanding of how to remove a chevy dash, we’ll get started. The first thing you’ll need to do is locate the three screws that hold the dash in place. These screws are located at the top of the dash, near the windshield. Once you’ve found these screws, remove them and set them aside.

With the screws removed, you should be able to gently pull the dash away from the windshield. Be careful not to damage any of the wires or connectors that are attached to the back of the dash. Once you’ve pulled the dash away from the windshield, you’ll see two more screws that need to be removed. These screws are located at the bottom of the dash, near where it meets the center console.

Remove these two screws and then gently pull the dash away from the center console. Again, be careful not to damage any of the wires or connectors that are attached to the back of the dash. With both screws removed and both sides of the dash pulled away from their respective mounting points, you should now be able to lift the entiredashboard out of your Chevy truck.

88 94 chevy dash removal

Assuming you want to remove the entire dash:

First, disconnect the battery. Next, there are three bolts that hold the steering column in. Remove those. There are also two screws on each side of the dash near where your knees would be. Take those out too. Now, there are plastic pop rivets holding the dash in along the sides and on the top by the windshield. Use a drill or a screwdriver to remove them. The last thing holding the dash in place should be the wires for things like your dimmer switch and cigarette lighter. Carefully disconnect them and tuck them out of the way. The dash should now be loose. You may need someone to help you pull it out as it is fairly heavy.

How to remove your old dashboard

1. How to remove your old dashboard

If you’re looking to replace your old Chevy dashboard, the process is actually quite simple. All you need is a screwdriver and a few minutes of time. Here’s how to do it:

Begin by unscrewing the two screws that hold the dashboard in place at the top. Then, pull the dashboard away from the windshield. There are likely still a few wires attached, so be careful not to damage them as you disconnect the dashboard.

Once thedashboard is free, you can begin removing any additional components that you want to replace. This includes the radio, climate control unit, and more. Simply unscrew these pieces and set them aside.

With all of the old components removed, you can now install your new Chevy dashboard. Begin by attaching it to the windshield using the two screws at the top. Then, reconnect any wires or additional components that you removed earlier. Once everything is in place, give everything a final tightness check before heading out on the road!

What to do with your old dashboard

If you are thinking about removing your old Chevrolet dashboard, there are a few things you should consider first. For one, you will need to find a new place to put all of the gauges and controls that were on the dashboard. You will also need to figure out how to wire everything up so it works correctly. Additionally, you may want to consider painting or recovering the new dash before installation.

How to install your new dashboard

Assuming you have your new OBS Chevy dashboard and everything needed for the install, here are the steps to follow for a successful install.

1. First, disconnect the battery by removing the negative cable.